page-bg

product

  • Acidizing Corrosion Inhibitor AC-CI Series Products

    Acidizing Corrosion Inhibitor AC-CI Series Products

    AC-CI series acidizing corrosion inhibitors are new Mannich based corrosion inhibitors that has attracted much attention in the industry. Compared with other Mannich base corrosion inhibitors, those new corrosion inhibitors have better dissolution and dispersion in high temperature applications with more significant corrosion inhibition effect and lower cost. The product series covers the application temperature from 90℃ to 180℃.

  • Flow-back Additive AC-FLA2

    Flow-back Additive AC-FLA2

    AC-FLA2 is a mixture of fluorinated surfactant which can reduce the surface interfacial tension of liquid at very low concentration. The surface tension value can reach 15-16Mn /m with AC-FLA2 dosage at the concentration of 1000ppm. At 100ppm dosage the surface tension and interface tension can be reduced to below 22mN/m and 1mN/m respectively. The product promotes the rapid flow back of residual facturing fluid after fracturing operations to reduce the damage to the formation, and can be widely used in oil well fracturing, acidizing and well washing operations.

  • Friction Reducer Emulsion AC-RY series

    Friction Reducer Emulsion AC-RY series

    AC-RY series friction reducers are a series of emulsion manufactured via acrylamide with various functional monomers reverse emulsion method, they can be easily dispersed in water and fast hydrated to its maximum viscosity within 1 minute, therefore no need for dissolution equipment on site.

  • Oil&Gas Well Corrosion Inhibitor AC-WSCI2

    Oil&Gas Well Corrosion Inhibitor AC-WSCI2

    AC-WSCI2 oil&gas well corrosion inhibitor is composed of imidazoline quaternary ammonium salt derivatives, double imidazoline and other components with corrosion inhibition properties. This product has good solubility in water and oil, which can effectively solve the problem of electro-chemical corrosion of the inner wall of the pipeline caused by multiple corrosive media such as CO2 ,H2S and inorganic salts. Moreover,it has good stability and low usage, which can greatly save the operation cost.

  • Drilling FLuid Lubricant AC-Lub Series products

    Drilling FLuid Lubricant AC-Lub Series products

    AC-Lub series drilling fluid lubricants containing two products, AC-LubGT for general water based mud drilling and AC-LubHP for high temperature water base mud drilling up to 160°C .Those lubricants are derived from vegetable based fatty acid and fatty alcohol compound so they are all non-toxic and eco-friendly.

  • Production Pipeline Bactericide AC-SAF

    Production Pipeline Bactericide AC-SAF

    AC-SAF is a highly effective non oxidizing bactericide (especially for Sulfate-reducing bacteria) with good adsorption, permeability and film-forming properties. It can quickly penetrate into the biofilm and form a film on the inner wall of the pipeline. It can disinfect and sterilize the bacteria that have produced biofilm on the inner wall of the pipeline, effectively improving the sterilization rate..

  • H2S Scavenger AC-SE1

    H2S Scavenger AC-SE1

    H2S Scavenger AC-SE1 is a colorless to light yellow, odorless, transparent and uniform liquid with stable properties, not easy to decompose, non volatile, non flammable, non foaming, safe and easy to store. The absorption rate of hydrogen sulfide is high, the absorption time is short, and the product generated after combining with hydrogen sulfide is stable. Convenient preparation, simple dosing method, and non corrosive. It has good compatibility with common surfactant and has a certain degree of bactericidal and corrosion inhibition effect.

  • Shale Inhibitor AC-SI01

    Shale Inhibitor AC-SI01

    AC-SI01 shale inhibitor can effectively inhibit the expansion and viscosity of formation clay particle transportation. The results of anti inflation rate indicate that AC-SI01 has better anti inflation effects than usual standard clay stabilizer. AC-SI01 is applicable for acidic, alkaline, and high-temperature conditions with good anti swelling effect, water washability, and a long shelf life.

  • Friction Reducer Suspension AC-SU40

    Friction Reducer Suspension AC-SU40

    AC-SU40 friction reducer suspension has the advantages of both powder type and emulsion friction reducers. It not only has high molecular weight, good viscosity, but also has good dispersion, stability and drag reduction performance. Low usage of raw materials, ready to use, simplifies on-site preparation, and lower overall costs.

  • Friction Reducer Powder AC-FM series

    Friction Reducer Powder AC-FM series

    AC-FM series friction reducers are a series of poly-acrylamide powders manufactured via acrylamide with various functional monomers to different molecular weight, due to their high active content and molecular weight, they are ideal for more challenging and complex brine composition to meet required friction reduction rate. Operators will need specific dissolution equipment onsite to facilitate dispersing and hydrating AC-FM series powder.

  • Wellbore Strengthening Additive AC-WBSHIELD

    Wellbore Strengthening Additive AC-WBSHIELD

    AC-WBSHIELD is an oil in water polymer emulsion whose internal phase is polymer and external phase is water. The particle size of emulsion droplets is between 20-500 nm (in the particle size distribution, more than 90% is below 200 nm). Through particle size matching, it can be used to seal the micro fractures of the formation,especially for drilling in shale gas&oil formation with micro fractures.

  • Acid thickener AC-CHJ50

    Acid thickener AC-CHJ50

    AC-CHJ50 acid thickener is an organic cationic polymer synthesized by copolymerization method.It can quickly dissolve and increase viscosity in acid solution, and can resist high temperatures above 120 ℃. It has good compatibility and outstanding friction reduction performance, and can effectively play a role in slowing down, reducing drag, and thickening to improve the depth of acidizing.