page-bg

product

  • Flow-back Additive AC-FLA2

    Flow-back Additive AC-FLA2

    AC-FLA2 is a mixture of fluorinated surfactant which can reduce the surface interfacial tension of liquid at very low concentration. The surface tension value can reach 15-16Mn /m with AC-FLA2 dosage at the concentration of 1000ppm. At 100ppm dosage the surface tension and interface tension can be reduced to below 22mN/m and 1mN/m respectively. The product promotes the rapid flow back of residual facturing fluid after fracturing operations to reduce the damage to the formation, and can be widely used in oil well fracturing, acidizing and well washing operations.

  • Friction Reducer Emulsion AC-RY series

    Friction Reducer Emulsion AC-RY series

    AC-RY series friction reducers are a series of emulsion manufactured via acrylamide with various functional monomers reverse emulsion method, they can be easily dispersed in water and fast hydrated to its maximum viscosity within 1 minute, therefore no need for dissolution equipment on site.

  • Shale Inhibitor AC-SI01

    Shale Inhibitor AC-SI01

    AC-SI01 shale inhibitor can effectively inhibit the expansion and viscosity of formation clay particle transportation. The results of anti inflation rate indicate that AC-SI01 has better anti inflation effects than usual standard clay stabilizer. AC-SI01 is applicable for acidic, alkaline, and high-temperature conditions with good anti swelling effect, water washability, and a long shelf life.

  • Friction Reducer Suspension AC-SU40

    Friction Reducer Suspension AC-SU40

    AC-SU40 friction reducer suspension has the advantages of both powder type and emulsion friction reducers. It not only has high molecular weight, good viscosity, but also has good dispersion, stability and drag reduction performance. Low usage of raw materials, ready to use, simplifies on-site preparation, and lower overall costs.

  • Friction Reducer Powder AC-FM series

    Friction Reducer Powder AC-FM series

    AC-FM series friction reducers are a series of poly-acrylamide powders manufactured via acrylamide with various functional monomers to different molecular weight, due to their high active content and molecular weight, they are ideal for more challenging and complex brine composition to meet required friction reduction rate. Operators will need specific dissolution equipment onsite to facilitate dispersing and hydrating AC-FM series powder.