Friction Reducer Suspension AC-SU40
Product Detail:
AC-SU40 friction reducer suspension is prepared by following principles:polymer powder are combined through physical dispersion and chemical methods, resulting in a greater repulsion energy between polymer powder particles than their mutual attraction energy, and the particles are in a stable dispersion state. The preparation method uses powder to prepare emulsion type suspension, so that suspension has the advantages of both powder type and emulsion. It not only has high molecular weight, good viscosity, but also has good dispersion and stability.
Features:
The preparation process is simple and highly controllable, suitable for large-scale production.
Low dosage, ready to use, with high viscosity and high resistance reduction performance.
Combined advantages of both powder and emulsion, with high molecular weight, good viscosity, good dispersibility, stability and drag reduction performance.
Application :
AC-FM series friction reducer powders are applicable for more challenging and complex brine composition to meet required friction reduction rate. Operators will not need specific dissolution equipment onsite for using AC-SU40 friction reducer suspension.
Parameters:
|
Item |
Typical Parameter |
|
Appearance |
White to light yellow emulsion |
|
pH |
6-8 |
|
Apparent viscosity (0.1%, water, 170S-1), mPa. s |
≥15 |
|
Suspension stability |
Uniform without layering |
|
Frost resistance, ℃ |
≤ -20 |
